Products

86-0755-88367005
13823664591

Home >Products > Magnetic Switch > Flow switchFlow switch

W131

Magnetic flow switch can output on or off signal according to the flow, it is an important component of the fluid flow control system.When the flow in the pipe is lager than start-up volume,magnetic valve core is forced by the flow pressure to move forward then trigger the reed switch. When the flow recrease to a volume smaller than start-up volume,magnetic valve core is forced back to the original place by the repellant force of the reset magnet, the reed switch recovers.

Description
Data download

Magnetic flow switch can output on or off signal according to the flow, it is an important component of the fluid flow control system. When the flow in the pipe is lager than start-up volume,magnetic valve core is forced by the flow pressure to move forward then trigger the reed switch. When the flow recrease to a volume smaller than start-up volume,magnetic valve core is forced back to the original place by the repellant force of the reset magnet, the reed switch recovers.


1. Use magnetic piston valve core, recover by magnetic force,can installation from any angle

2. Case material is nylon(PA) and glass fiber,has good mechanical strength and corrosio-nresistance. Reed switch is sealed by hot melt adhesive and epoxyresin, is very solid and reliable, is waterproof and dustproof

3. The action element is imported dry spring tube, and it is sealed with hot melt glue and epoxy resin. It can resist, waterproof and dustproof, super long life.

4. The shell is nylon plus fiber with good mechanical properties and corrosion resistance.

5. Minimum start flow is 0.5l/mim ~ 1.0l/mim;The maximum start flow is 6L/mim;Small flow startup, after startup, large flow passes. (the maximum flow through is the same as the same level valve)

6. This flow switch can soften the water quality.Water is not easy to scale after three layers of strong magnetization.

7. Install any Angle.

8. No standby power consumption


Application:

The magnetic flow switch has been widely used in the control of water flow, such as air-conditioning system, pharmaceutical equipment, gas water heater, boiler equipment, etc. The design is diverse, without standby power consumption, installation is simple and easy to adjust, the customer can define the sensitivity.



 Download Spec.